Methane extraction technology - biogas

Products

Methane extraction technology - biogas

Methane extraction technology - biogas

PSA natural gas purification is a technology using adsorbent to separate gases such as methane, carbon dioxide and nitrogen in biogas to achieve the goal of methane enrichment. Biogas removes water through a liquid separation tank and then after desulphurization in a column enters PSA to produce natural gas product. Installation scale: 200~5000nm³/h.

Desulfurization technology using the redox wet method

Desulfurization technology using the redox wet method

HDS cyanogen desulfurization and removal technology is a wet oxidation method, which is a distinctive desulfurization method developed by Huaxi and scientific and technical personnel in the synthetic ammonia and coke industry, which allows the desulfurization percentage of H2S in gas to be at least 99.9%, and the desulfurization percentage of HCN to be more than 97%.

Flue gas desulfurization technology using ammonia

Flue gas desulfurization technology using ammonia

A by-product of desulfurization using the ammonia method is ammonium sulfate fertilizer; from 1 ton of ammonia you can get 4 tons of by-product ammonium sulfate, and its profitability depends on the prices of ammonium sulfate and ammonia.

Vinyl chloride recycling technology

Vinyl chloride recycling technology

After liquid separation in the vinyl chloride tail gas separator, a large amount of vinyl chloride and acetylene still remained, and the vinyl chloride and acetylene were concentrated for disposal by adsorption, which had high economic value. Installation scale: 100~10000nm³/h.

VOC tail gas disposal

VOC tail gas disposal

Tank and loading waste gas, tail gas containing VOC in petrochemical and chemical industries. It is first condensed using the PSA method and then disposed of by condensation, which meets environmental drainage requirements and allows the recycling of some organic matter. Installation scale: 100-3000nm3/h

MEA-MDEA-NHD Desulfurization Technology

MEA-MDEA-NHD Desulfurization Technology

A typical amine desulfurization and decarbonization process consists of four parts: absorption, flash evaporation, heat exchange and regeneration (stripping).

<<<123456>>> 4 / 6

Products

Professionalism is the basis of technology. Strong technology, practical effect, excellent service, and set the standard.

Home
Products
About Us
Contacts

Пожалуйста, оставьте нам сообщение

Privacy Policy

Thank you for using this site (“we”, “us” or “our”). We respect your rights and interests in personal information, comply with the principles of legality, legitimacy, necessity and integrity, and protect your information security. This policy describes how we process your personal information.

1. Collection of information
Information you provide voluntarily, such as name, mobile number, email address, etc., is completed during registration. Information such as device model, browser type, access logs, IP address, etc. is automatically collected to optimize service and security.

2. Use of information
provide, maintain and optimize website services;
account verification, security protection and fraud prevention;
Send necessary information such as service notifications and policy updates;
Comply with laws, regulations and applicable regulatory requirements.

3. Protection and exchange of information
We use security measures such as encryption and access controls to protect your information and only store it for the minimum period necessary to complete the task.
Do not sell or rent personal information to third parties without your consent; Share only if:
Get your explicit permission;
third parties entrusted to provide services (subject to confidentiality obligations);
Respond to legal requests or protect legitimate interests.

4. Your rights
You have the right to access, correct and supplement your personal information, and you can also apply to cancel your account (after cancellation, the information will be deleted or anonymized according to the rules). To exercise your rights, you may contact us using the contact details provided below.

5. Policy Updates
Any changes to this policy will be notified by posting on the site. Your continued use of the services means your acceptance of the amended rules.