Products
-
CO removal by pressure swing adsorption
-
Nitrogen production by pressure swing adsorption
-
Ionic liquid desulfurization technology
-
Hydrogen purification technology by pressure swing adsorption
-
Liquefaction of natural gas
-
Desulfurization technology using the redox wet method
-
Food grade CO2 purified
-
Hydrogen production from coke oven gases
-
Flue gas CO2 recovery technology
-
Hydrogen production by coal gasification
-
Methane extraction technology - biogas
-
Coke gas purification technology
-
Hydrogen production by conversion of light hydrocarbons with steam
-
Battery material precursor production technology
-
Special acid regeneration equipment
-
CO2 removal by pressure swing adsorption
Vinyl chloride recycling technology
After liquid separation in the vinyl chloride tail gas separator, a large amount of vinyl chloride and acetylene still remained, and the vinyl chloride and acetylene were concentrated for disposal by adsorption, which had high economic value.
Installation scale: 100~10000nm³/h.
Description
marker
use:
Vinyl chloride recycling technology
Description of technology
After liquid separation in the vinyl chloride tail gas separator, a large amount of vinyl chloride and acetylene still remained, and the vinyl chloride and acetylene were concentrated for disposal by adsorption, which had high economic value.
Installation scale: 100~10000nm³/h.
Specifications
1．Vinyl chloride recycling technology
2．Low power consumption;
3．Simple process, reliable operation;
4．This process uses vacuum regeneration method, the adsorbent regeneration effect is good.
Applications
Recover economic components from vinyl chloride exhaust gases, polypropylene exhaust gases, etc.
contact us
Related Popular Products
absorbent
An adsorbent is a solid substance that can effectively adsorb certain components from gases or liquids. Adsorbents usually have the following characteristics: large specific surface area, suitable pore structure and surface structure
Hydrogen purification technology by pressure swing adsorption
The Pressure Swing Adsorption Nitrogen Generator (abbreviated as PSA Nitrogen Generator) is a nitrogen generator designed and manufactured on the principle of gas separation with PSA technology. Usually two adsorbers are used, the automatic control system strictly controls the time sequence according to a certain programmable program, alternately carries out pressure adsorption and pressure reduction regeneration to carry out the separation of nitrogen and oxygen and obtain nitrogen of the required purity.
CO removal by pressure swing adsorption
Purification of carbon monoxide from a mixture containing carbon monoxide is carried out by PSA technology. First remove carbon dioxide, moisture and traces of sulfur from the feed gas; The purified gas enters the VPSA unit to remove hydrogen, nitrogen, methane and other impurities, the adsorbed carbon monoxide is removed as a product after vacuum desorption during decompression.
Ethylene tail gas recovery
In recent years, with the increase in people's awareness of environmental protection, the improvement of environmental requirements for petrochemical plants in China and around the world, and the recovery and reuse of waste to reduce production costs, considering the higher economic efficiency for enterprises, the exhaust gas recovery technology of ethylene and acrylic plants has great social and economic benefits.
Ionic liquid desulfurization technology
Ionic liquid house gas desulphurization technology is mainly designed to treat and utilize sulfur dioxide in flue gas and other industrial waste gases. The most important feature of the technology is that, simultaneously with the removal of sulfur dioxide from the flue gas, high-purity sulfur dioxide (>99.5%) is produced by-product and sulfur pollutants are recycled. High-purity sulfur dioxide can serve as an excellent raw material for the production of liquid sulfur dioxide, sulfuric acid, sulfur and other chemical products.
Hydrogen production by conversion of light hydrocarbons with steam
The production of hydrogen from natural gas consists of two parts: the conversion of gas vapor into converted gas and the purification of hydrogen using the PSA method. After compression and desulfurization, natural gas is mixed with water vapor. Under the action of nickel catalyst at a temperature of 750~850℃, natural gas is converted into converted gas consisting of hydrogen, carbon monoxide and carbon dioxide. The converted gas can be further converted into hydrogen and carbon dioxide by conversion technology, then the converted gas or reformed gas is purified and separated by PSA method to produce high purity hydrogen.
Special acid regeneration equipment
Acid regeneration technical services: providing acid regeneration technical services, upgrading the acid regeneration plant to achieve the indicators (more than 10 sets have been built, HCl and dust not more than 15 mg/Nm3)
Flue gas denitrification SCR、SNC
Technology Description Technology Description There are two main denitration methods (1) Selective Catalytic Reduction (SCR) technology and (2) Selective Non-Capital Reduction (SNCR) technology.
Flue gas desulfurization technology using ammonia
A by-product of desulfurization using the ammonia method is ammonium sulfate fertilizer; from 1 ton of ammonia you can get 4 tons of by-product ammonium sulfate, and its profitability depends on the prices of ammonium sulfate and ammonia.
MPS decarbonization technology
This technology is used to extract the greenhouse gas CO2 from flue gases, and the recovered CO2 can be used to solve the carbon imbalance problem in methanol or urea using natural gas as a feedstock.
Desulfurization technology using the redox wet method
HDS cyanogen desulfurization and removal technology is a wet oxidation method, which is a distinctive desulfurization method developed by Huaxi and scientific and technical personnel in the synthetic ammonia and coke industry, which allows the desulfurization percentage of H2S in gas to be at least 99.9%, and the desulfurization percentage of HCN to be more than 97%.
Wet CO2 removal technology
Wet method decarbonization technology is a low energy consumption technology that is widely used to remove CO2 and H2S from synthetic ammonia, methanol feed gas, refinery gas, urban coal gas and natural gas.
Nitrogen production by pressure swing adsorption
The Pressure Swing Adsorption Nitrogen Generator (abbreviated as PSA Nitrogen Generator) is a nitrogen generator designed and manufactured on the principle of gas separation with PSA technology. Usually two adsorbers are used, the automatic control system strictly controls the time sequence according to a certain programmable program, alternately carries out pressure adsorption and pressure reduction regeneration to carry out the separation of nitrogen and oxygen and obtain nitrogen of the required purity.
Argon purification
The rich argon after compression enters the adsorption column, which is in the adsorption state in the PSA-Ar stage, impurities such as CO2, N2 and part of O2 are adsorbed by adsorption, and the non-adsorbed argon flows out from the top of the column as a product, producing argon with a frequency of 99.99 - 99999. Installation scale: 100~5000nm³/h.
Ionic liquid desulfurizer
Ionic liquids are substances consisting of anions and cations that exist in a liquid state at or near room temperature. Unlike typical organic solvents, ionic liquids do not contain electrically neutral molecules; they are all composed of anions and cations.
Coal gas organic sulfur fine removal technology
Because blast furnace gas contains organic sulfur, H2S and other impurities, if blast furnace gas is used as fuel, the SO2 in the flue gas does not meet emission standards. There are two main measures to reduce emissions: blast furnace gas desulfurization or exhaust flue gas desulfurization.