Products
-
Nitrogen production by pressure swing adsorption
-
VOC tail gas disposal
-
Battery material precursor production technology
-
absorbent
-
Liquefaction of natural gas
-
Methane extraction technology – coalbed methane
-
Argon purification
-
Oxygen purification and utilization
-
Valve
-
Methane extraction technology - biogas
-
Hydrogen production by coal gasification
-
Oxygen production by pressure swing adsorption
-
Ionic liquid desulfurizer
-
Coal gas organic sulfur fine removal technology
-
Unit desalting and demineralization equipment and special resin
-
Coke gas purification technology
MPS decarbonization technology
This technology is used to extract the greenhouse gas CO2 from flue gases, and the recovered CO2 can be used to solve the carbon imbalance problem in methanol or urea using natural gas as a feedstock.
Description
marker
use:
MPS decarbonization technology
Technical overview
1.Introduction to technology
This technology is used to extract the greenhouse gas CO2 from flue gases, and the recovered CO2 can be used to solve the carbon imbalance problem in methanol or urea using natural gas as a feedstock.
Secondly, the characteristics of the technology:
1、The solution formula has the advantages of less degradation and basic non-corrosion of carbon steel;
2、Strong CO2 absorption ability;
3, less solvent consumption, low steam consumption.
Third, areas of application:
Natural gas chemical industry Various types of flue gases
Flow diagram
Classic result
| Serial number | user | scale | remark |
| (10000 tons/year) | |||
| 1 | Gas Metal Construction (Chongqing) | 22 | |
| 2 | Chongqing Cable | 30 | |
| 3 | Establishment of natural gas production (Hebei Province) | 10 | |
| 4 | Sichuan vinyl production plant | 5 | |
| 5 | Methanol plant in north-west Kavava | 7 | |
| 6 | Chongqing Special Steel Corporation Limited | 0.9 | Limestone gas |
| 7 | Gorm methanol | 5 |
contact us
Related Popular Products
VOC tail gas disposal
Tank and loading waste gas, tail gas containing VOC in petrochemical and chemical industries. It is first condensed using the PSA method and then disposed of by condensation, which meets environmental drainage requirements and allows the recycling of some organic matter. Installation scale: 100-3000nm3/h
Nitrogen production by pressure swing adsorption
The Pressure Swing Adsorption Nitrogen Generator (abbreviated as PSA Nitrogen Generator) is a nitrogen generator designed and manufactured on the principle of gas separation with PSA technology. Usually two adsorbers are used, the automatic control system strictly controls the time sequence according to a certain programmable program, alternately carries out pressure adsorption and pressure reduction regeneration to carry out the separation of nitrogen and oxygen and obtain nitrogen of the required purity.
Ionic liquid desulfurization technology
Ionic liquid house gas desulphurization technology is mainly designed to treat and utilize sulfur dioxide in flue gas and other industrial waste gases. The most important feature of the technology is that, simultaneously with the removal of sulfur dioxide from the flue gas, high-purity sulfur dioxide (>99.5%) is produced by-product and sulfur pollutants are recycled. High-purity sulfur dioxide can serve as an excellent raw material for the production of liquid sulfur dioxide, sulfuric acid, sulfur and other chemical products.
Desulfurization technology using the redox wet method
HDS cyanogen desulfurization and removal technology is a wet oxidation method, which is a distinctive desulfurization method developed by Huaxi and scientific and technical personnel in the synthetic ammonia and coke industry, which allows the desulfurization percentage of H2S in gas to be at least 99.9%, and the desulfurization percentage of HCN to be more than 97%.
Coke gas purification technology
After recycling in the chemical industry, coke oven gas retains impurities of sulfur, tar, naphthalene and benzene. When producing electricity from coke oven gas and CCPP, compressing coke oven gas, heating coke oven gas, cutting coke oven gas and producing chemical products from coke oven gas, production problems arise, such as clogging of nozzles, corrosion, excess SO2 emissions after combustion, carbon deposits and poisoning of catalysts, so deep purification of coke oven gas from harmful impurities is necessary.
Food grade CO2 purified
Food CO₂ purified Adopting the internationally recognized new catalytic oxidation purification technology, the catalytic purification tower adopts a new type of internal cooling device, so that the bed temperature distribution is in the appropriate reaction zone, normal production heat balance, reducing the use of electric furnaces and extending the service life of the catalyst.
Hydrogen production by coal gasification
Producing technical hydrogen from coal is a good option for large-scale hydrogen production or in the absence of other suitable raw materials. From raw coal, high purity hydrogen is produced through gasification, conversion, purification, PSA, etc. units.
Flue gas denitrification SCR、SNC
Technology Description Technology Description There are two main denitration methods (1) Selective Catalytic Reduction (SCR) technology and (2) Selective Non-Capital Reduction (SNCR) technology.
Wet CO2 removal technology
Wet method decarbonization technology is a low energy consumption technology that is widely used to remove CO2 and H2S from synthetic ammonia, methanol feed gas, refinery gas, urban coal gas and natural gas.
CO removal by pressure swing adsorption
Purification of carbon monoxide from a mixture containing carbon monoxide is carried out by PSA technology. First remove carbon dioxide, moisture and traces of sulfur from the feed gas; The purified gas enters the VPSA unit to remove hydrogen, nitrogen, methane and other impurities, the adsorbed carbon monoxide is removed as a product after vacuum desorption during decompression.
Waste acid regeneration
Our company provides waste acid regeneration technology and acts as a general contractor for the supply of complete plants, as well as related services for maintenance, technical reconstruction, sale of spare parts, etc.
absorbent
An adsorbent is a solid substance that can effectively adsorb certain components from gases or liquids. Adsorbents usually have the following characteristics: large specific surface area, suitable pore structure and surface structure
Hydrogen purification technology by pressure swing adsorption
The Pressure Swing Adsorption Nitrogen Generator (abbreviated as PSA Nitrogen Generator) is a nitrogen generator designed and manufactured on the principle of gas separation with PSA technology. Usually two adsorbers are used, the automatic control system strictly controls the time sequence according to a certain programmable program, alternately carries out pressure adsorption and pressure reduction regeneration to carry out the separation of nitrogen and oxygen and obtain nitrogen of the required purity.
Hydrogen production by splitting methanol
This process is based on the convenient source of methanol and desalting water as raw materials, at a temperature of 220-280°C, a special catalyst is catalyzed into converted gas containing hydrogen and carbon dioxide, the principle of which is as follows: Main reaction: CH3OH=CO+2H2 +90.7 kJ/mol CO+H2O=CO2+H2 -41.2 kJ/mol General reaction: CH3OH+H2O=CO2+3H2 +49.5 kJ/mol Auxiliary reaction: 2CH3OH=CH3OCH3+H2O -24.9 kJ/mol CO+3H2=CH4+H2O -+206.3 kJ/mol
Flue gas CO2 recovery technology
The flue gas from casing kilns (lime kilns) is characterized by low pressure, high temperature, dust, low CO2 content and the presence of impurities such as NOx and SO2. According to the characteristics of the feed gas and the product quality requirements, the technological process of flue gas CO2 recovery plant mainly includes: deep furnace gas purification, single-column VPSA enrichment, double-column VPSA enrichment, CO2 compression, CO2 purification, CO2 liquefaction and purification, CO2 evaporation, storage and supply system.
Oxygen purification and utilization
In the production and combustion process of lithium batteries, residual high-temperature oxygen-rich flue gas is generated, in the traditional method, usually after environmental treatment, it is directly discharged into the atmosphere as exhaust gas, which leads to large oxygen consumption in the production process, high energy consumption, thereby increasing the production cost of lithium batteries.