Products
-
Battery material precursor production technology
-
Coal gas organic sulfur fine removal technology
-
Liquefaction of natural gas
-
Hydrogen production by coal gasification
-
VOC tail gas disposal
-
Desulfurization technology using the redox wet method
-
Valve
-
CO removal by pressure swing adsorption
-
Special acid regeneration equipment
-
Technology of desulfurization and CO2 removal using NHD method
-
Flue gas denitrification SCR、SNC
-
CO2 removal by pressure swing adsorption
-
Unit desalting and demineralization equipment and special resin
-
Coke gas purification technology
-
Hydrogen purification technology by pressure swing adsorption
-
Wet CO2 removal technology
Oxygen purification and utilization
In the production and combustion process of lithium batteries, residual high-temperature oxygen-rich flue gas is generated, in the traditional method, usually after environmental treatment, it is directly discharged into the atmosphere as exhaust gas, which leads to large oxygen consumption in the production process, high energy consumption, thereby increasing the production cost of lithium batteries.
Description
marker
use:
Oxygen purification and utilization
Description of technology
In the production and combustion process of lithium batteries, residual high-temperature oxygen-rich flue gas is generated, in the traditional method, usually after environmental treatment, it is directly discharged into the atmosphere as exhaust gas, which leads to large oxygen consumption in the production process, high energy consumption, thereby increasing the production cost of lithium batteries.
Our company's patent technology is to recycle and reuse high-purity oxygen from high-temperature oxygen-rich flue gas, which can effectively save energy consumption in the lithium battery production system, reduce production costs, production enterprises have significant economic benefits.
Installation scale: 2000~50000nm³/h.
Specifications
1、The technological process is advanced, safe, easy to operate, and high oxygen purity, oxygen purity is more than 99%;
2、Wide operating pressure range, low energy consumption, operating flexibility 20-120%;
3、High degree of automation of the device, self-tuning control, automatic fault diagnosis and other functions are provided, convenient to start and stop, automatic control is realized without operator presence.
Applications
Extraction of oxygen from flue gas, drying and removal of CO2 oxygen.
Typical Results
| serial number | users | Scale (product gas) | raw materials | Product purity | technological route |
| 1 | Jinchi Energy Materials Co Ltd | 26500Nm 3/h | enriched | More than 99% | TSA+PSA |
contact us
Related Popular Products
Wet CO2 removal technology
Wet method decarbonization technology is a low energy consumption technology that is widely used to remove CO2 and H2S from synthetic ammonia, methanol feed gas, refinery gas, urban coal gas and natural gas.
Vinyl chloride recycling technology
After liquid separation in the vinyl chloride tail gas separator, a large amount of vinyl chloride and acetylene still remained, and the vinyl chloride and acetylene were concentrated for disposal by adsorption, which had high economic value. Installation scale: 100~10000nm³/h.
Food grade CO2 purified
Food CO₂ purified Adopting the internationally recognized new catalytic oxidation purification technology, the catalytic purification tower adopts a new type of internal cooling device, so that the bed temperature distribution is in the appropriate reaction zone, normal production heat balance, reducing the use of electric furnaces and extending the service life of the catalyst.
Hydrogen production by splitting methanol
This process is based on the convenient source of methanol and desalting water as raw materials, at a temperature of 220-280°C, a special catalyst is catalyzed into converted gas containing hydrogen and carbon dioxide, the principle of which is as follows: Main reaction: CH3OH=CO+2H2 +90.7 kJ/mol CO+H2O=CO2+H2 -41.2 kJ/mol General reaction: CH3OH+H2O=CO2+3H2 +49.5 kJ/mol Auxiliary reaction: 2CH3OH=CH3OCH3+H2O -24.9 kJ/mol CO+3H2=CH4+H2O -+206.3 kJ/mol
MEA-MDEA-NHD Desulfurization Technology
A typical amine desulfurization and decarbonization process consists of four parts: absorption, flash evaporation, heat exchange and regeneration (stripping).
Technology of desulfurization and CO2 removal using NHD method
Gas decarbonization technology using polyethylene glycol dimethyl ether as the absorption solution, known abroad as Seleoxl technology, known as NHD technology in China; this technology is included in the National Catalog of Clean Manufacturing Technologies in Key Industries by the State Economic and Trade Commission. This technology is a physical technology for CO2 removal, regeneration is carried out using air or nitrogen, so this process does not require the consumption of steam.
Flue gas desulfurization technology using ammonia
A by-product of desulfurization using the ammonia method is ammonium sulfate fertilizer; from 1 ton of ammonia you can get 4 tons of by-product ammonium sulfate, and its profitability depends on the prices of ammonium sulfate and ammonia.
Coke gas purification technology
After recycling in the chemical industry, coke oven gas retains impurities of sulfur, tar, naphthalene and benzene. When producing electricity from coke oven gas and CCPP, compressing coke oven gas, heating coke oven gas, cutting coke oven gas and producing chemical products from coke oven gas, production problems arise, such as clogging of nozzles, corrosion, excess SO2 emissions after combustion, carbon deposits and poisoning of catalysts, so deep purification of coke oven gas from harmful impurities is necessary.
Flue gas CO2 recovery technology
The flue gas from casing kilns (lime kilns) is characterized by low pressure, high temperature, dust, low CO2 content and the presence of impurities such as NOx and SO2. According to the characteristics of the feed gas and the product quality requirements, the technological process of flue gas CO2 recovery plant mainly includes: deep furnace gas purification, single-column VPSA enrichment, double-column VPSA enrichment, CO2 compression, CO2 purification, CO2 liquefaction and purification, CO2 evaporation, storage and supply system.
CO2 removal by pressure swing adsorption
PSA CO separation technology is widely used in synthetic ammonia, methanol, alkali and industrial CO2 separation decarbonization plants, as well as CO2-containing tail gas recovery plants, due to the high degree of automation, convenient control of removal precision, low energy consumption and a wide range of applications.
Methane extraction technology – coalbed methane
At present, both at home and abroad, the main method for separating oxygenated coalbed methane is membrane separation, oxygen removal method, pressure swing adsorption (PSA) method, direct liquefaction method. After comprehensive comparative study of other low-enrichment gas separation technologies, Huaxi, based on its own low-concentration gas development technology, with complete analysis of the properties of the source gas, adopted pressure swing adsorption technology to separate CH4 and N2/O2 under micro-pressure conditions. Gas with low concentration and methane content of 10 to 15% can be enriched up to 30% at a time for combustion and power generation, as well as secondary enrichment for natural gas production. Installation scale: 2000~30000nm³/h.
VOC tail gas disposal
Tank and loading waste gas, tail gas containing VOC in petrochemical and chemical industries. It is first condensed using the PSA method and then disposed of by condensation, which meets environmental drainage requirements and allows the recycling of some organic matter. Installation scale: 100-3000nm3/h
Ionic liquid desulfurization technology
Ionic liquid house gas desulphurization technology is mainly designed to treat and utilize sulfur dioxide in flue gas and other industrial waste gases. The most important feature of the technology is that, simultaneously with the removal of sulfur dioxide from the flue gas, high-purity sulfur dioxide (>99.5%) is produced by-product and sulfur pollutants are recycled. High-purity sulfur dioxide can serve as an excellent raw material for the production of liquid sulfur dioxide, sulfuric acid, sulfur and other chemical products.
Hydrogen purification technology by pressure swing adsorption
The Pressure Swing Adsorption Nitrogen Generator (abbreviated as PSA Nitrogen Generator) is a nitrogen generator designed and manufactured on the principle of gas separation with PSA technology. Usually two adsorbers are used, the automatic control system strictly controls the time sequence according to a certain programmable program, alternately carries out pressure adsorption and pressure reduction regeneration to carry out the separation of nitrogen and oxygen and obtain nitrogen of the required purity.
Argon purification
The rich argon after compression enters the adsorption column, which is in the adsorption state in the PSA-Ar stage, impurities such as CO2, N2 and part of O2 are adsorbed by adsorption, and the non-adsorbed argon flows out from the top of the column as a product, producing argon with a frequency of 99.99 - 99999. Installation scale: 100~5000nm³/h.
Hydrogen production by conversion of light hydrocarbons with steam
The production of hydrogen from natural gas consists of two parts: the conversion of gas vapor into converted gas and the purification of hydrogen using the PSA method. After compression and desulfurization, natural gas is mixed with water vapor. Under the action of nickel catalyst at a temperature of 750~850℃, natural gas is converted into converted gas consisting of hydrogen, carbon monoxide and carbon dioxide. The converted gas can be further converted into hydrogen and carbon dioxide by conversion technology, then the converted gas or reformed gas is purified and separated by PSA method to produce high purity hydrogen.