Products
-
Hydrogen purification technology by pressure swing adsorption
-
Coke gas purification technology
-
Methane extraction technology – coalbed methane
-
Technology of desulfurization and CO2 removal using NHD method
-
Flue gas CO2 recovery technology
-
Hydrogen production by conversion of light hydrocarbons with steam
-
MPS decarbonization technology
-
Liquefaction of natural gas
-
CO2 removal by pressure swing adsorption
-
Vinyl chloride recycling technology
-
CO removal by pressure swing adsorption
-
Waste acid regeneration
-
VOC tail gas disposal
-
Hydrogen production from coke oven gases
-
Ionic liquid desulfurizer
-
Desulfurization technology using the redox wet method
Flue gas desulfurization technology using ammonia
A by-product of desulfurization using the ammonia method is ammonium sulfate fertilizer; from 1 ton of ammonia you can get 4 tons of by-product ammonium sulfate, and its profitability depends on the prices of ammonium sulfate and ammonia.
Description
marker
use:
Flue gas desulfurization technology using ammonia
Description of technology
A by-product of desulfurization using the ammonia method is ammonium sulfate fertilizer; from 1 ton of ammonia you can get 4 tons of by-product ammonium sulfate, and its profitability depends on the prices of ammonium sulfate and ammonia.
Specifications
1、Mature and reliable technology
This technology is more adaptive, can support the desulfurization efficiency ranging from 30% to 110% of the production load over 98%, and is mature and reliable, regardless of the ash size in the flue gas to achieve stable operation.
2、Economic and social benefits are obvious
One ton of ammonia can release 2 tons of sulfur dioxide and produce 4 tons of ammonium sulfate, which in some cases offsets the cost of the desulfurant with a small surplus. If electricity prices are subsidized, profits can be achieved; If waste ammonia is available, it can be recycled and significant economic benefits achieved.
3、This technology does not involve the discharge of waste from wastewater and does not require a water treatment or solid waste disposal plant.
Applications
This technology can be used for all types of flue gases, such as: flue gases of non-ferrous metallurgy (flue gases of ring concentration, exhaust gases of sulfuric acid); Boiler smoke; Klaus emissions; Catalytic flue gas regeneration.
Technological process
Technological solution I: proposal for crystallization by evaporation of residual heat of flue gases in the column (at low ash content)
Technological solution II: crystallization by evaporation outside the column (with a high ash content in the flue gas)
Typical Results
| manufacturer | scale | Notes |
| Guangxi Fertilizer Plant | 160,000 Nm3/h | sulfuric tail gas |
| Shandong Thermal Power Plant | Boiler 240th3 | boiler smoke |
| Chemical plant in Shaanxi | Boiler 220th3 | boiler smoke |
| Sichuan plant | Boiler 130 tx2 | boiler smoke |
contact us
Related Popular Products
CO removal by pressure swing adsorption
Purification of carbon monoxide from a mixture containing carbon monoxide is carried out by PSA technology. First remove carbon dioxide, moisture and traces of sulfur from the feed gas; The purified gas enters the VPSA unit to remove hydrogen, nitrogen, methane and other impurities, the adsorbed carbon monoxide is removed as a product after vacuum desorption during decompression.
Special acid regeneration equipment
Acid regeneration technical services: providing acid regeneration technical services, upgrading the acid regeneration plant to achieve the indicators (more than 10 sets have been built, HCl and dust not more than 15 mg/Nm3)
Desulfurization technology using the redox wet method
HDS cyanogen desulfurization and removal technology is a wet oxidation method, which is a distinctive desulfurization method developed by Huaxi and scientific and technical personnel in the synthetic ammonia and coke industry, which allows the desulfurization percentage of H2S in gas to be at least 99.9%, and the desulfurization percentage of HCN to be more than 97%.
Nitrogen production by pressure swing adsorption
The Pressure Swing Adsorption Nitrogen Generator (abbreviated as PSA Nitrogen Generator) is a nitrogen generator designed and manufactured on the principle of gas separation with PSA technology. Usually two adsorbers are used, the automatic control system strictly controls the time sequence according to a certain programmable program, alternately carries out pressure adsorption and pressure reduction regeneration to carry out the separation of nitrogen and oxygen and obtain nitrogen of the required purity.
Hydrogen production by coal gasification
Producing technical hydrogen from coal is a good option for large-scale hydrogen production or in the absence of other suitable raw materials. From raw coal, high purity hydrogen is produced through gasification, conversion, purification, PSA, etc. units.
Methane extraction technology – coalbed methane
At present, both at home and abroad, the main method for separating oxygenated coalbed methane is membrane separation, oxygen removal method, pressure swing adsorption (PSA) method, direct liquefaction method. After comprehensive comparative study of other low-enrichment gas separation technologies, Huaxi, based on its own low-concentration gas development technology, with complete analysis of the properties of the source gas, adopted pressure swing adsorption technology to separate CH4 and N2/O2 under micro-pressure conditions. Gas with low concentration and methane content of 10 to 15% can be enriched up to 30% at a time for combustion and power generation, as well as secondary enrichment for natural gas production. Installation scale: 2000~30000nm³/h.
Methane extraction technology - biogas
PSA natural gas purification is a technology using adsorbent to separate gases such as methane, carbon dioxide and nitrogen in biogas to achieve the goal of methane enrichment. Biogas removes water through a liquid separation tank and then after desulphurization in a column enters PSA to produce natural gas product. Installation scale: 200~5000nm³/h.
Flue gas CO2 recovery technology
The flue gas from casing kilns (lime kilns) is characterized by low pressure, high temperature, dust, low CO2 content and the presence of impurities such as NOx and SO2. According to the characteristics of the feed gas and the product quality requirements, the technological process of flue gas CO2 recovery plant mainly includes: deep furnace gas purification, single-column VPSA enrichment, double-column VPSA enrichment, CO2 compression, CO2 purification, CO2 liquefaction and purification, CO2 evaporation, storage and supply system.
Ionic liquid desulfurizer
Ionic liquids are substances consisting of anions and cations that exist in a liquid state at or near room temperature. Unlike typical organic solvents, ionic liquids do not contain electrically neutral molecules; they are all composed of anions and cations.
Ionic liquid desulfurization technology
Ionic liquid house gas desulphurization technology is mainly designed to treat and utilize sulfur dioxide in flue gas and other industrial waste gases. The most important feature of the technology is that, simultaneously with the removal of sulfur dioxide from the flue gas, high-purity sulfur dioxide (>99.5%) is produced by-product and sulfur pollutants are recycled. High-purity sulfur dioxide can serve as an excellent raw material for the production of liquid sulfur dioxide, sulfuric acid, sulfur and other chemical products.
CO2 removal by pressure swing adsorption
PSA CO separation technology is widely used in synthetic ammonia, methanol, alkali and industrial CO2 separation decarbonization plants, as well as CO2-containing tail gas recovery plants, due to the high degree of automation, convenient control of removal precision, low energy consumption and a wide range of applications.
Ethylene tail gas recovery
In recent years, with the increase in people's awareness of environmental protection, the improvement of environmental requirements for petrochemical plants in China and around the world, and the recovery and reuse of waste to reduce production costs, considering the higher economic efficiency for enterprises, the exhaust gas recovery technology of ethylene and acrylic plants has great social and economic benefits.
Vinyl chloride recycling technology
After liquid separation in the vinyl chloride tail gas separator, a large amount of vinyl chloride and acetylene still remained, and the vinyl chloride and acetylene were concentrated for disposal by adsorption, which had high economic value. Installation scale: 100~10000nm³/h.
Technology of desulfurization and CO2 removal using NHD method
Gas decarbonization technology using polyethylene glycol dimethyl ether as the absorption solution, known abroad as Seleoxl technology, known as NHD technology in China; this technology is included in the National Catalog of Clean Manufacturing Technologies in Key Industries by the State Economic and Trade Commission. This technology is a physical technology for CO2 removal, regeneration is carried out using air or nitrogen, so this process does not require the consumption of steam.
Battery material precursor production technology
The regeneration of waste hydrochloric acid in steel mills mainly solves the recycling of hydrochloric acid and the recycling of iron powder, reducing wastewater emissions, a major role in solving environmental problems. Spray roasting hydrochloric acid regeneration methods can also be used to regenerate hydrochlorinated titanium white industry leach solutions, produce cobalt oxide powders using cobalt chloride and various metal oxides using chloride (hydrochloric acid regeneration of various metal chlorides).