Products
-
Hydrogen production by splitting methanol
-
Argon purification
-
Methane extraction technology - biogas
-
Ethylene tail gas recovery
-
Unit desalting and demineralization equipment and special resin
-
Flue gas desulfurization technology using ammonia
-
VOC tail gas disposal
-
Food grade CO2 purified
-
MPS decarbonization technology
-
Nitrogen production by pressure swing adsorption
-
CO removal by pressure swing adsorption
-
Wet CO2 removal technology
-
absorbent
-
MEA-MDEA-NHD Desulfurization Technology
-
Waste acid regeneration
-
Hydrogen purification technology by pressure swing adsorption
Hydrogen production by coal gasification
Producing technical hydrogen from coal is a good option for large-scale hydrogen production or in the absence of other suitable raw materials.
From raw coal, high purity hydrogen is produced through gasification, conversion, purification, PSA, etc. units.
Description
marker
use:
Hydrogen production by coal gasification
Description of technology
Producing technical hydrogen from coal is a good option for large-scale hydrogen production or in the absence of other suitable raw materials.
From raw coal, high purity hydrogen is produced through gasification, conversion, purification, PSA, etc. units.
Currently, the following types of coal gasification are widespread: continuous gasification with oxygen saturation on a stationary bed at atmospheric pressure, continuous pulverized coal gasification with oxygen saturation on a fluidized bed at atmospheric pressure, gasification of water and coal pulp under pressure, pulverized coal gasification under pressure
Installation scale: 5000~100000nm³/h.
Specifications
（1）Suitable for large-scale hydrogen production projects;
（2）The cost of hydrogen is lower than other methods for producing hydrogen;
（3）The investment is relatively large.
Applications
In addition to brown coal and peat with high internal water content, and coal with a calorific value of less than 22940 kJ/kg and an ash melting point higher than 1350 °C, other adhesive coals, coals with high ash content, petroleum coke and bituminous coal can be used as raw materials.
Flow diagram
Typical Results
| serial number | users | scale | raw materials | Products | technological route |
| 1 | Zhejiang Longsheng Chemical Group | 5000Nm3/h | coal | 99.99% | Coal gasification + desulfurization + conversion + PSA |
| 2 | Shandong Fangming Chemical Company Co., Ltd. | 12000Nm3/h | coal | 99.99% | Coal gasification + desulfurization + conversion + PSA |
| 3 | Zhejiang Hengyi Chemical Company | 30000Nm3/h | coal | 99.99% | Coal gasification + desulfurization + conversion + PSA |
contact us
Related Popular Products
Flue gas denitrification SCR、SNC
Technology Description Technology Description There are two main denitration methods (1) Selective Catalytic Reduction (SCR) technology and (2) Selective Non-Capital Reduction (SNCR) technology.
Battery material precursor production technology
The regeneration of waste hydrochloric acid in steel mills mainly solves the recycling of hydrochloric acid and the recycling of iron powder, reducing wastewater emissions, a major role in solving environmental problems. Spray roasting hydrochloric acid regeneration methods can also be used to regenerate hydrochlorinated titanium white industry leach solutions, produce cobalt oxide powders using cobalt chloride and various metal oxides using chloride (hydrochloric acid regeneration of various metal chlorides).
Technology of desulfurization and CO2 removal using NHD method
Gas decarbonization technology using polyethylene glycol dimethyl ether as the absorption solution, known abroad as Seleoxl technology, known as NHD technology in China; this technology is included in the National Catalog of Clean Manufacturing Technologies in Key Industries by the State Economic and Trade Commission. This technology is a physical technology for CO2 removal, regeneration is carried out using air or nitrogen, so this process does not require the consumption of steam.
Oxygen purification and utilization
In the production and combustion process of lithium batteries, residual high-temperature oxygen-rich flue gas is generated, in the traditional method, usually after environmental treatment, it is directly discharged into the atmosphere as exhaust gas, which leads to large oxygen consumption in the production process, high energy consumption, thereby increasing the production cost of lithium batteries.
Coke gas purification technology
After recycling in the chemical industry, coke oven gas retains impurities of sulfur, tar, naphthalene and benzene. When producing electricity from coke oven gas and CCPP, compressing coke oven gas, heating coke oven gas, cutting coke oven gas and producing chemical products from coke oven gas, production problems arise, such as clogging of nozzles, corrosion, excess SO2 emissions after combustion, carbon deposits and poisoning of catalysts, so deep purification of coke oven gas from harmful impurities is necessary.
Hydrogen production by conversion of light hydrocarbons with steam
The production of hydrogen from natural gas consists of two parts: the conversion of gas vapor into converted gas and the purification of hydrogen using the PSA method. After compression and desulfurization, natural gas is mixed with water vapor. Under the action of nickel catalyst at a temperature of 750~850℃, natural gas is converted into converted gas consisting of hydrogen, carbon monoxide and carbon dioxide. The converted gas can be further converted into hydrogen and carbon dioxide by conversion technology, then the converted gas or reformed gas is purified and separated by PSA method to produce high purity hydrogen.
Liquefaction of natural gas
The production of LNG from natural gas first involves the absorption of CO2, H2S and other acidic components of natural gas with an MDEA solution. The unabsorbed purified gas is dried after separating the liquid, then enters the cold box to produce LNG.
absorbent
An adsorbent is a solid substance that can effectively adsorb certain components from gases or liquids. Adsorbents usually have the following characteristics: large specific surface area, suitable pore structure and surface structure
Coal gas organic sulfur fine removal technology
Because blast furnace gas contains organic sulfur, H2S and other impurities, if blast furnace gas is used as fuel, the SO2 in the flue gas does not meet emission standards. There are two main measures to reduce emissions: blast furnace gas desulfurization or exhaust flue gas desulfurization.
Nitrogen production by pressure swing adsorption
The Pressure Swing Adsorption Nitrogen Generator (abbreviated as PSA Nitrogen Generator) is a nitrogen generator designed and manufactured on the principle of gas separation with PSA technology. Usually two adsorbers are used, the automatic control system strictly controls the time sequence according to a certain programmable program, alternately carries out pressure adsorption and pressure reduction regeneration to carry out the separation of nitrogen and oxygen and obtain nitrogen of the required purity.
Flue gas desulfurization technology using ammonia
A by-product of desulfurization using the ammonia method is ammonium sulfate fertilizer; from 1 ton of ammonia you can get 4 tons of by-product ammonium sulfate, and its profitability depends on the prices of ammonium sulfate and ammonia.
Vinyl chloride recycling technology
After liquid separation in the vinyl chloride tail gas separator, a large amount of vinyl chloride and acetylene still remained, and the vinyl chloride and acetylene were concentrated for disposal by adsorption, which had high economic value. Installation scale: 100~10000nm³/h.
CO removal by pressure swing adsorption
Purification of carbon monoxide from a mixture containing carbon monoxide is carried out by PSA technology. First remove carbon dioxide, moisture and traces of sulfur from the feed gas; The purified gas enters the VPSA unit to remove hydrogen, nitrogen, methane and other impurities, the adsorbed carbon monoxide is removed as a product after vacuum desorption during decompression.
Ionic liquid desulfurization technology
Ionic liquid house gas desulphurization technology is mainly designed to treat and utilize sulfur dioxide in flue gas and other industrial waste gases. The most important feature of the technology is that, simultaneously with the removal of sulfur dioxide from the flue gas, high-purity sulfur dioxide (>99.5%) is produced by-product and sulfur pollutants are recycled. High-purity sulfur dioxide can serve as an excellent raw material for the production of liquid sulfur dioxide, sulfuric acid, sulfur and other chemical products.
Food grade CO2 purified
Food CO₂ purified Adopting the internationally recognized new catalytic oxidation purification technology, the catalytic purification tower adopts a new type of internal cooling device, so that the bed temperature distribution is in the appropriate reaction zone, normal production heat balance, reducing the use of electric furnaces and extending the service life of the catalyst.