Products
-
Vinyl chloride recycling technology
-
Hydrogen production from coke oven gases
-
MEA-MDEA-NHD Desulfurization Technology
-
Battery material precursor production technology
-
Special acid regeneration equipment
-
Desulfurization technology using the redox wet method
-
Methane extraction technology - biogas
-
Methane extraction technology – coalbed methane
-
Ethylene tail gas recovery
-
Hydrogen purification technology by pressure swing adsorption
-
Flue gas denitrification SCR、SNC
-
Flue gas CO2 recovery technology
-
Oxygen production by pressure swing adsorption
-
Hydrogen production by splitting methanol
-
Coke gas purification technology
-
absorbent
VOC tail gas disposal
Tank and loading waste gas, tail gas containing VOC in petrochemical and chemical industries. It is first condensed using the PSA method and then disposed of by condensation, which meets environmental drainage requirements and allows the recycling of some organic matter.
Installation scale: 100-3000nm3/h
Description
marker
use:
VOC tail gas disposal
Description of technology
Tank and loading waste gas, tail gas containing VOC in petrochemical and chemical industries. It is first condensed using the PSA method and then disposed of by condensation, which meets environmental drainage requirements and allows the recycling of some organic matter.
Installation scale: 100-3000nm3/h
Specifications
1.Short process, high removal efficiency, full exhaust gas compliance with environmental standards;
2.Investment is small, organic matter can be recycled, economic efficiency is obvious;
3.High degree of installation automation, ease of starting and stopping.
Applications
Treatment of various types of tail gases containing VOC, Disposal of organic substances.
Flow diagram
contact us
Related Popular Products
Desulfurization technology using the redox wet method
HDS cyanogen desulfurization and removal technology is a wet oxidation method, which is a distinctive desulfurization method developed by Huaxi and scientific and technical personnel in the synthetic ammonia and coke industry, which allows the desulfurization percentage of H2S in gas to be at least 99.9%, and the desulfurization percentage of HCN to be more than 97%.
Hydrogen production by conversion of light hydrocarbons with steam
The production of hydrogen from natural gas consists of two parts: the conversion of gas vapor into converted gas and the purification of hydrogen using the PSA method. After compression and desulfurization, natural gas is mixed with water vapor. Under the action of nickel catalyst at a temperature of 750~850℃, natural gas is converted into converted gas consisting of hydrogen, carbon monoxide and carbon dioxide. The converted gas can be further converted into hydrogen and carbon dioxide by conversion technology, then the converted gas or reformed gas is purified and separated by PSA method to produce high purity hydrogen.
Waste acid regeneration
Our company provides waste acid regeneration technology and acts as a general contractor for the supply of complete plants, as well as related services for maintenance, technical reconstruction, sale of spare parts, etc.
Oxygen purification and utilization
In the production and combustion process of lithium batteries, residual high-temperature oxygen-rich flue gas is generated, in the traditional method, usually after environmental treatment, it is directly discharged into the atmosphere as exhaust gas, which leads to large oxygen consumption in the production process, high energy consumption, thereby increasing the production cost of lithium batteries.
Unit desalting and demineralization equipment and special resin
This unit is an exclusive block device for the ionic liquid flue gas desulfurization project and is the key equipment for the ionic liquid desulfurization process, the desalting device is designed to remove harmful impurities such as sulfuric acid roots, chlorine and fluorine in the ionic liquid; Sodium Removal Device are used to remove harmful cationic impurities such as sodium in ionic liquid.
Vinyl chloride recycling technology
After liquid separation in the vinyl chloride tail gas separator, a large amount of vinyl chloride and acetylene still remained, and the vinyl chloride and acetylene were concentrated for disposal by adsorption, which had high economic value. Installation scale: 100~10000nm³/h.
Battery material precursor production technology
The regeneration of waste hydrochloric acid in steel mills mainly solves the recycling of hydrochloric acid and the recycling of iron powder, reducing wastewater emissions, a major role in solving environmental problems. Spray roasting hydrochloric acid regeneration methods can also be used to regenerate hydrochlorinated titanium white industry leach solutions, produce cobalt oxide powders using cobalt chloride and various metal oxides using chloride (hydrochloric acid regeneration of various metal chlorides).
Liquefaction of natural gas
The production of LNG from natural gas first involves the absorption of CO2, H2S and other acidic components of natural gas with an MDEA solution. The unabsorbed purified gas is dried after separating the liquid, then enters the cold box to produce LNG.
MPS decarbonization technology
This technology is used to extract the greenhouse gas CO2 from flue gases, and the recovered CO2 can be used to solve the carbon imbalance problem in methanol or urea using natural gas as a feedstock.
Methane extraction technology - biogas
PSA natural gas purification is a technology using adsorbent to separate gases such as methane, carbon dioxide and nitrogen in biogas to achieve the goal of methane enrichment. Biogas removes water through a liquid separation tank and then after desulphurization in a column enters PSA to produce natural gas product. Installation scale: 200~5000nm³/h.
Methane extraction technology – coalbed methane
At present, both at home and abroad, the main method for separating oxygenated coalbed methane is membrane separation, oxygen removal method, pressure swing adsorption (PSA) method, direct liquefaction method. After comprehensive comparative study of other low-enrichment gas separation technologies, Huaxi, based on its own low-concentration gas development technology, with complete analysis of the properties of the source gas, adopted pressure swing adsorption technology to separate CH4 and N2/O2 under micro-pressure conditions. Gas with low concentration and methane content of 10 to 15% can be enriched up to 30% at a time for combustion and power generation, as well as secondary enrichment for natural gas production. Installation scale: 2000~30000nm³/h.
Coke gas purification technology
After recycling in the chemical industry, coke oven gas retains impurities of sulfur, tar, naphthalene and benzene. When producing electricity from coke oven gas and CCPP, compressing coke oven gas, heating coke oven gas, cutting coke oven gas and producing chemical products from coke oven gas, production problems arise, such as clogging of nozzles, corrosion, excess SO2 emissions after combustion, carbon deposits and poisoning of catalysts, so deep purification of coke oven gas from harmful impurities is necessary.
Wet CO2 removal technology
Wet method decarbonization technology is a low energy consumption technology that is widely used to remove CO2 and H2S from synthetic ammonia, methanol feed gas, refinery gas, urban coal gas and natural gas.
Hydrogen production from coke oven gases
Coke oven gas has the characteristics of large gas volume, low pressure, complex impurity content and low hydrogen content. In addition to being used to generate electricity, hydrogen can be recovered for use in chemical plants such as coal tar hydrogenation plants, glycol plants and synthetic ammonia plants. High purity hydrogen gas is obtained from coke oven gas through compression, purification, conversion, PSA, etc. units. Through process integration, it is also possible to simultaneously produce CO, hydrogen and LNG products.
CO2 removal by pressure swing adsorption
PSA CO separation technology is widely used in synthetic ammonia, methanol, alkali and industrial CO2 separation decarbonization plants, as well as CO2-containing tail gas recovery plants, due to the high degree of automation, convenient control of removal precision, low energy consumption and a wide range of applications.