Products
-
Valve
-
Methane extraction technology - biogas
-
Food grade CO2 purified
-
Coke gas purification technology
-
MPS decarbonization technology
-
Ethylene tail gas recovery
-
CO2 removal by pressure swing adsorption
-
Special acid regeneration equipment
-
Oxygen purification and utilization
-
Battery material precursor production technology
-
Coal gas organic sulfur fine removal technology
-
Technology of desulfurization and CO2 removal using NHD method
-
Wet CO2 removal technology
-
Argon purification
-
Flue gas CO2 recovery technology
-
absorbent
Desulfurization technology using the redox wet method
HDS cyanogen desulfurization and removal technology is a wet oxidation method, which is a distinctive desulfurization method developed by Huaxi and scientific and technical personnel in the synthetic ammonia and coke industry, which allows the desulfurization percentage of H2S in gas to be at least 99.9%, and the desulfurization percentage of HCN to be more than 97%.
Description
marker
use:
Desulfurization technology using the redox wet method
Description of technology
HDS cyanogen desulfurization and removal technology is a wet oxidation method, which is a distinctive desulfurization method developed by Huaxi and scientific and technical personnel in the synthetic ammonia and coke industry, which allows the desulfurization percentage of H2S in gas to be at least 99.9%, and the desulfurization percentage of HCN to be more than 97%.
Specifications
1、The system resistance is small, the purification rate is high.
2、Installation investment can be reduced by 20-30% compared with traditional column filling design.
3、The issue of the plug in the column has been fundamentally resolved.
4、When the system load is low, the spray column can be turned on rarely or not, which can reduce operating costs.
Applications
Coke plant, coal chemical plant.
Flow diagram
Typical Results
| Project name | Division name |
| 80000Nm3/h Coke oven gas desulfurization | Hebei Steel Company |
| 50000Nm3/h Coke oven gas desulfurization | steel mill in the province |
| 50000Nm3/h Coke oven gas desulfurization | Inner Mongolia Chemical Company |
| 40000Nm3/h Coke oven gas desulfurization | Shandong Coke Chemical Company |
| 45000Nm3/h Coke oven gas desulfurization | Hebei Coke Chemical Company |
| Semi-water gas desulfurization with gas processing volume of 100,000 Nm3/h | Henan Chemical Company |
contact us
Related Popular Products
Vinyl chloride recycling technology
After liquid separation in the vinyl chloride tail gas separator, a large amount of vinyl chloride and acetylene still remained, and the vinyl chloride and acetylene were concentrated for disposal by adsorption, which had high economic value. Installation scale: 100~10000nm³/h.
Coal gas organic sulfur fine removal technology
Because blast furnace gas contains organic sulfur, H2S and other impurities, if blast furnace gas is used as fuel, the SO2 in the flue gas does not meet emission standards. There are two main measures to reduce emissions: blast furnace gas desulfurization or exhaust flue gas desulfurization.
Flue gas desulfurization technology using ammonia
A by-product of desulfurization using the ammonia method is ammonium sulfate fertilizer; from 1 ton of ammonia you can get 4 tons of by-product ammonium sulfate, and its profitability depends on the prices of ammonium sulfate and ammonia.
Coke gas purification technology
After recycling in the chemical industry, coke oven gas retains impurities of sulfur, tar, naphthalene and benzene. When producing electricity from coke oven gas and CCPP, compressing coke oven gas, heating coke oven gas, cutting coke oven gas and producing chemical products from coke oven gas, production problems arise, such as clogging of nozzles, corrosion, excess SO2 emissions after combustion, carbon deposits and poisoning of catalysts, so deep purification of coke oven gas from harmful impurities is necessary.
Battery material precursor production technology
The regeneration of waste hydrochloric acid in steel mills mainly solves the recycling of hydrochloric acid and the recycling of iron powder, reducing wastewater emissions, a major role in solving environmental problems. Spray roasting hydrochloric acid regeneration methods can also be used to regenerate hydrochlorinated titanium white industry leach solutions, produce cobalt oxide powders using cobalt chloride and various metal oxides using chloride (hydrochloric acid regeneration of various metal chlorides).
Waste acid regeneration
Our company provides waste acid regeneration technology and acts as a general contractor for the supply of complete plants, as well as related services for maintenance, technical reconstruction, sale of spare parts, etc.
Methane extraction technology - biogas
PSA natural gas purification is a technology using adsorbent to separate gases such as methane, carbon dioxide and nitrogen in biogas to achieve the goal of methane enrichment. Biogas removes water through a liquid separation tank and then after desulphurization in a column enters PSA to produce natural gas product. Installation scale: 200~5000nm³/h.
Unit desalting and demineralization equipment and special resin
This unit is an exclusive block device for the ionic liquid flue gas desulfurization project and is the key equipment for the ionic liquid desulfurization process, the desalting device is designed to remove harmful impurities such as sulfuric acid roots, chlorine and fluorine in the ionic liquid; Sodium Removal Device are used to remove harmful cationic impurities such as sodium in ionic liquid.
MEA-MDEA-NHD Desulfurization Technology
A typical amine desulfurization and decarbonization process consists of four parts: absorption, flash evaporation, heat exchange and regeneration (stripping).
Wet CO2 removal technology
Wet method decarbonization technology is a low energy consumption technology that is widely used to remove CO2 and H2S from synthetic ammonia, methanol feed gas, refinery gas, urban coal gas and natural gas.
Hydrogen production by coal gasification
Producing technical hydrogen from coal is a good option for large-scale hydrogen production or in the absence of other suitable raw materials. From raw coal, high purity hydrogen is produced through gasification, conversion, purification, PSA, etc. units.
Ethylene tail gas recovery
In recent years, with the increase in people's awareness of environmental protection, the improvement of environmental requirements for petrochemical plants in China and around the world, and the recovery and reuse of waste to reduce production costs, considering the higher economic efficiency for enterprises, the exhaust gas recovery technology of ethylene and acrylic plants has great social and economic benefits.
Flue gas denitrification SCR、SNC
Technology Description Technology Description There are two main denitration methods (1) Selective Catalytic Reduction (SCR) technology and (2) Selective Non-Capital Reduction (SNCR) technology.
Argon purification
The rich argon after compression enters the adsorption column, which is in the adsorption state in the PSA-Ar stage, impurities such as CO2, N2 and part of O2 are adsorbed by adsorption, and the non-adsorbed argon flows out from the top of the column as a product, producing argon with a frequency of 99.99 - 99999. Installation scale: 100~5000nm³/h.
Hydrogen purification technology by pressure swing adsorption
The Pressure Swing Adsorption Nitrogen Generator (abbreviated as PSA Nitrogen Generator) is a nitrogen generator designed and manufactured on the principle of gas separation with PSA technology. Usually two adsorbers are used, the automatic control system strictly controls the time sequence according to a certain programmable program, alternately carries out pressure adsorption and pressure reduction regeneration to carry out the separation of nitrogen and oxygen and obtain nitrogen of the required purity.
VOC tail gas disposal
Tank and loading waste gas, tail gas containing VOC in petrochemical and chemical industries. It is first condensed using the PSA method and then disposed of by condensation, which meets environmental drainage requirements and allows the recycling of some organic matter. Installation scale: 100-3000nm3/h