Products
-
Hydrogen production from coke oven gases
-
Vinyl chloride recycling technology
-
Liquefaction of natural gas
-
VOC tail gas disposal
-
Waste acid regeneration
-
Oxygen purification and utilization
-
MPS decarbonization technology
-
Food grade CO2 purified
-
Unit desalting and demineralization equipment and special resin
-
Flue gas denitrification SCR、SNC
-
Wet CO2 removal technology
-
Hydrogen production by splitting methanol
-
Ethylene tail gas recovery
-
Methane extraction technology – coalbed methane
-
Hydrogen production by coal gasification
-
Ionic liquid desulfurizer
Argon purification
The rich argon after compression enters the adsorption column, which is in the adsorption state in the PSA-Ar stage, impurities such as CO2, N2 and part of O2 are adsorbed by adsorption, and the non-adsorbed argon flows out from the top of the column as a product, producing argon with a frequency of 99.99 - 99999.
Installation scale: 100~5000nm³/h.
Description
marker
use:
Argon purification
Description of technology
The rich argon after compression enters the adsorption column, which is in the adsorption state in the PSA-Ar stage, impurities such as CO2, N2 and part of O2 are adsorbed by adsorption, and the non-adsorbed argon flows out from the top of the column as a product, producing argon with a frequency of 99.99 - 99999.
Installation scale: 100~5000nm³/h.
Specifications
（1）Low adsorption pressure, low energy consumption;
（2）High purity argon;
（3）The device has a high degree of automation, convenient to start and stop.
Applications
Extracting argon from argon-rich gases.
Flow diagram
contact us
Related Popular Products
VOC tail gas disposal
Tank and loading waste gas, tail gas containing VOC in petrochemical and chemical industries. It is first condensed using the PSA method and then disposed of by condensation, which meets environmental drainage requirements and allows the recycling of some organic matter. Installation scale: 100-3000nm3/h
Nitrogen production by pressure swing adsorption
The Pressure Swing Adsorption Nitrogen Generator (abbreviated as PSA Nitrogen Generator) is a nitrogen generator designed and manufactured on the principle of gas separation with PSA technology. Usually two adsorbers are used, the automatic control system strictly controls the time sequence according to a certain programmable program, alternately carries out pressure adsorption and pressure reduction regeneration to carry out the separation of nitrogen and oxygen and obtain nitrogen of the required purity.
Unit desalting and demineralization equipment and special resin
This unit is an exclusive block device for the ionic liquid flue gas desulfurization project and is the key equipment for the ionic liquid desulfurization process, the desalting device is designed to remove harmful impurities such as sulfuric acid roots, chlorine and fluorine in the ionic liquid; Sodium Removal Device are used to remove harmful cationic impurities such as sodium in ionic liquid.
MPS decarbonization technology
This technology is used to extract the greenhouse gas CO2 from flue gases, and the recovered CO2 can be used to solve the carbon imbalance problem in methanol or urea using natural gas as a feedstock.
Wet CO2 removal technology
Wet method decarbonization technology is a low energy consumption technology that is widely used to remove CO2 and H2S from synthetic ammonia, methanol feed gas, refinery gas, urban coal gas and natural gas.
Hydrogen production by splitting methanol
This process is based on the convenient source of methanol and desalting water as raw materials, at a temperature of 220-280°C, a special catalyst is catalyzed into converted gas containing hydrogen and carbon dioxide, the principle of which is as follows: Main reaction: CH3OH=CO+2H2 +90.7 kJ/mol CO+H2O=CO2+H2 -41.2 kJ/mol General reaction: CH3OH+H2O=CO2+3H2 +49.5 kJ/mol Auxiliary reaction: 2CH3OH=CH3OCH3+H2O -24.9 kJ/mol CO+3H2=CH4+H2O -+206.3 kJ/mol
Battery material precursor production technology
The regeneration of waste hydrochloric acid in steel mills mainly solves the recycling of hydrochloric acid and the recycling of iron powder, reducing wastewater emissions, a major role in solving environmental problems. Spray roasting hydrochloric acid regeneration methods can also be used to regenerate hydrochlorinated titanium white industry leach solutions, produce cobalt oxide powders using cobalt chloride and various metal oxides using chloride (hydrochloric acid regeneration of various metal chlorides).
CO2 removal by pressure swing adsorption
PSA CO separation technology is widely used in synthetic ammonia, methanol, alkali and industrial CO2 separation decarbonization plants, as well as CO2-containing tail gas recovery plants, due to the high degree of automation, convenient control of removal precision, low energy consumption and a wide range of applications.
Technology of desulfurization and CO2 removal using NHD method
Gas decarbonization technology using polyethylene glycol dimethyl ether as the absorption solution, known abroad as Seleoxl technology, known as NHD technology in China; this technology is included in the National Catalog of Clean Manufacturing Technologies in Key Industries by the State Economic and Trade Commission. This technology is a physical technology for CO2 removal, regeneration is carried out using air or nitrogen, so this process does not require the consumption of steam.
Coal gas organic sulfur fine removal technology
Because blast furnace gas contains organic sulfur, H2S and other impurities, if blast furnace gas is used as fuel, the SO2 in the flue gas does not meet emission standards. There are two main measures to reduce emissions: blast furnace gas desulfurization or exhaust flue gas desulfurization.
Special acid regeneration equipment
Acid regeneration technical services: providing acid regeneration technical services, upgrading the acid regeneration plant to achieve the indicators (more than 10 sets have been built, HCl and dust not more than 15 mg/Nm3)
Ionic liquid desulfurizer
Ionic liquids are substances consisting of anions and cations that exist in a liquid state at or near room temperature. Unlike typical organic solvents, ionic liquids do not contain electrically neutral molecules; they are all composed of anions and cations.
Ethylene tail gas recovery
In recent years, with the increase in people's awareness of environmental protection, the improvement of environmental requirements for petrochemical plants in China and around the world, and the recovery and reuse of waste to reduce production costs, considering the higher economic efficiency for enterprises, the exhaust gas recovery technology of ethylene and acrylic plants has great social and economic benefits.
Desulfurization technology using the redox wet method
HDS cyanogen desulfurization and removal technology is a wet oxidation method, which is a distinctive desulfurization method developed by Huaxi and scientific and technical personnel in the synthetic ammonia and coke industry, which allows the desulfurization percentage of H2S in gas to be at least 99.9%, and the desulfurization percentage of HCN to be more than 97%.
Flue gas CO2 recovery technology
The flue gas from casing kilns (lime kilns) is characterized by low pressure, high temperature, dust, low CO2 content and the presence of impurities such as NOx and SO2. According to the characteristics of the feed gas and the product quality requirements, the technological process of flue gas CO2 recovery plant mainly includes: deep furnace gas purification, single-column VPSA enrichment, double-column VPSA enrichment, CO2 compression, CO2 purification, CO2 liquefaction and purification, CO2 evaporation, storage and supply system.