Products
-
Vinyl chloride recycling technology
-
Battery material precursor production technology
-
Flue gas denitrification SCR、SNC
-
Desulfurization technology using the redox wet method
-
Hydrogen production by splitting methanol
-
Coke gas purification technology
-
Food grade CO2 purified
-
Hydrogen production from coke oven gases
-
Methane extraction technology - biogas
-
Methane extraction technology – coalbed methane
-
Unit desalting and demineralization equipment and special resin
-
Wet CO2 removal technology
-
Coal gas organic sulfur fine removal technology
-
Flue gas desulfurization technology using ammonia
-
Technology of desulfurization and CO2 removal using NHD method
-
Hydrogen purification technology by pressure swing adsorption
CO removal by pressure swing adsorption
Purification of carbon monoxide from a mixture containing carbon monoxide is carried out by PSA technology. First remove carbon dioxide, moisture and traces of sulfur from the feed gas; The purified gas enters the VPSA unit to remove hydrogen, nitrogen, methane and other impurities, the adsorbed carbon monoxide is removed as a product after vacuum desorption during decompression.
Description
marker
use:
CO removal by pressure swing adsorption
Description of technology
Purification of carbon monoxide from a mixture containing carbon monoxide is carried out by PSA technology. First remove carbon dioxide, moisture and traces of sulfur from the feed gas; The purified gas enters the VPSA unit to remove hydrogen, nitrogen, methane and other impurities, the adsorbed carbon monoxide is removed as a product after vacuum desorption during decompression.
Specifications
1、Feed gas has a wide range of applications.
2、产The production cost of carbon monoxide is low
3、High purity carbon monoxide.
4、Short technological process of PSA technology, low working pressure: 0.1-6.0 MPag, product purity 99.5%.
Applications
Water gas, semi-water gas, converter gas, blast furnace gas, synthetic gas and other gases containing a CO gas source.
Flow diagram
Typical Results
| users | Installation scale | raw materials | Product purity | technological route |
| Shandong Dezhou Hengsheng Chemical Company | 1500 Nm3/h | water gas | 96.0% | VPSA |
| Shandong Dezhou Hengsheng Chemical Company | 1000 Nm3/h | water gas | 96.0% | VPSA |
| Yantai Julie TDI Co., Ltd. | 1000 Nm3/h | water gas | 98.0% | VPSA |
| Chongqing Changfeng Chemical Co., Ltd. | 600 Nm3/h | Gas | 99.0% | VPSA |
| Shanxi Luan Coal and Petroleum Company | 16000 Nm3/h | gas | 98.0% | VPSA |
| Pingmei Polycarbonate Co., Ltd. | 16000 Nm3/h | decarbonized cleaning gas | 99.95% | VPSA CO purification |
contact us
Related Popular Products
Ionic liquid desulfurizer
Ionic liquids are substances consisting of anions and cations that exist in a liquid state at or near room temperature. Unlike typical organic solvents, ionic liquids do not contain electrically neutral molecules; they are all composed of anions and cations.
Hydrogen production by conversion of light hydrocarbons with steam
The production of hydrogen from natural gas consists of two parts: the conversion of gas vapor into converted gas and the purification of hydrogen using the PSA method. After compression and desulfurization, natural gas is mixed with water vapor. Under the action of nickel catalyst at a temperature of 750~850℃, natural gas is converted into converted gas consisting of hydrogen, carbon monoxide and carbon dioxide. The converted gas can be further converted into hydrogen and carbon dioxide by conversion technology, then the converted gas or reformed gas is purified and separated by PSA method to produce high purity hydrogen.
Flue gas denitrification SCR、SNC
Technology Description Technology Description There are two main denitration methods (1) Selective Catalytic Reduction (SCR) technology and (2) Selective Non-Capital Reduction (SNCR) technology.
Unit desalting and demineralization equipment and special resin
This unit is an exclusive block device for the ionic liquid flue gas desulfurization project and is the key equipment for the ionic liquid desulfurization process, the desalting device is designed to remove harmful impurities such as sulfuric acid roots, chlorine and fluorine in the ionic liquid; Sodium Removal Device are used to remove harmful cationic impurities such as sodium in ionic liquid.
Methane extraction technology – coalbed methane
At present, both at home and abroad, the main method for separating oxygenated coalbed methane is membrane separation, oxygen removal method, pressure swing adsorption (PSA) method, direct liquefaction method. After comprehensive comparative study of other low-enrichment gas separation technologies, Huaxi, based on its own low-concentration gas development technology, with complete analysis of the properties of the source gas, adopted pressure swing adsorption technology to separate CH4 and N2/O2 under micro-pressure conditions. Gas with low concentration and methane content of 10 to 15% can be enriched up to 30% at a time for combustion and power generation, as well as secondary enrichment for natural gas production. Installation scale: 2000~30000nm³/h.
Hydrogen production by splitting methanol
This process is based on the convenient source of methanol and desalting water as raw materials, at a temperature of 220-280°C, a special catalyst is catalyzed into converted gas containing hydrogen and carbon dioxide, the principle of which is as follows: Main reaction: CH3OH=CO+2H2 +90.7 kJ/mol CO+H2O=CO2+H2 -41.2 kJ/mol General reaction: CH3OH+H2O=CO2+3H2 +49.5 kJ/mol Auxiliary reaction: 2CH3OH=CH3OCH3+H2O -24.9 kJ/mol CO+3H2=CH4+H2O -+206.3 kJ/mol
CO2 removal by pressure swing adsorption
PSA CO separation technology is widely used in synthetic ammonia, methanol, alkali and industrial CO2 separation decarbonization plants, as well as CO2-containing tail gas recovery plants, due to the high degree of automation, convenient control of removal precision, low energy consumption and a wide range of applications.
Methane extraction technology - biogas
PSA natural gas purification is a technology using adsorbent to separate gases such as methane, carbon dioxide and nitrogen in biogas to achieve the goal of methane enrichment. Biogas removes water through a liquid separation tank and then after desulphurization in a column enters PSA to produce natural gas product. Installation scale: 200~5000nm³/h.
Coal gas organic sulfur fine removal technology
Because blast furnace gas contains organic sulfur, H2S and other impurities, if blast furnace gas is used as fuel, the SO2 in the flue gas does not meet emission standards. There are two main measures to reduce emissions: blast furnace gas desulfurization or exhaust flue gas desulfurization.
Battery material precursor production technology
The regeneration of waste hydrochloric acid in steel mills mainly solves the recycling of hydrochloric acid and the recycling of iron powder, reducing wastewater emissions, a major role in solving environmental problems. Spray roasting hydrochloric acid regeneration methods can also be used to regenerate hydrochlorinated titanium white industry leach solutions, produce cobalt oxide powders using cobalt chloride and various metal oxides using chloride (hydrochloric acid regeneration of various metal chlorides).
Flue gas desulfurization technology using ammonia
A by-product of desulfurization using the ammonia method is ammonium sulfate fertilizer; from 1 ton of ammonia you can get 4 tons of by-product ammonium sulfate, and its profitability depends on the prices of ammonium sulfate and ammonia.
Flue gas CO2 recovery technology
The flue gas from casing kilns (lime kilns) is characterized by low pressure, high temperature, dust, low CO2 content and the presence of impurities such as NOx and SO2. According to the characteristics of the feed gas and the product quality requirements, the technological process of flue gas CO2 recovery plant mainly includes: deep furnace gas purification, single-column VPSA enrichment, double-column VPSA enrichment, CO2 compression, CO2 purification, CO2 liquefaction and purification, CO2 evaporation, storage and supply system.
Technology of desulfurization and CO2 removal using NHD method
Gas decarbonization technology using polyethylene glycol dimethyl ether as the absorption solution, known abroad as Seleoxl technology, known as NHD technology in China; this technology is included in the National Catalog of Clean Manufacturing Technologies in Key Industries by the State Economic and Trade Commission. This technology is a physical technology for CO2 removal, regeneration is carried out using air or nitrogen, so this process does not require the consumption of steam.
MPS decarbonization technology
This technology is used to extract the greenhouse gas CO2 from flue gases, and the recovered CO2 can be used to solve the carbon imbalance problem in methanol or urea using natural gas as a feedstock.
VOC tail gas disposal
Tank and loading waste gas, tail gas containing VOC in petrochemical and chemical industries. It is first condensed using the PSA method and then disposed of by condensation, which meets environmental drainage requirements and allows the recycling of some organic matter. Installation scale: 100-3000nm3/h